KLUBER LUBRICATION PRODUCTS
Klüber Lubrication is a global leader in specialty lubricants, oils and tribological solutions for industrial applications. Klüber Summit SH 46 is a synthetic air compressor oil formulated for demanding compressor service and extended oil change intervals.
Klüber Summit SH 46
Klüber Summit SH 46 is a synthetic air compressor oil based on synthetic hydrocarbons and additives. It is designed for oil-injected screw-type compressors and can provide oil change intervals of up to 10,000 operating hours under suitable operating conditions.
Product Description
Klüber Summit SH 46 is a synthetic air compressor oil based on a synthetic hydrocarbon blend with a special additive package. It is formulated for demanding compressor applications and is suitable for oil-injected screw-type compressors.
The oil offers low evaporation tendency, good oxidation stability and excellent water demulsibility. Under suitable operating conditions, oil change intervals of up to 10,000 operating hours can be achieved, helping reduce maintenance and operating costs.
Klüber Summit SH oils can be mixed with mineral oils and synthetic hydrocarbon oils, but are not miscible with polyglycol-based oils. The formulation also supports long service life of oil filters, activated carbon filters and oil separators.
Appearance – clear. Colour – colourless. Article number – 050005. ISO viscosity grade – 46.
Applications
- Oil-injected rotary screw compressors
- Rotary vane compressors
- Reciprocating compressors
- Centrifugal compressor applications where the specified viscosity is suitable
- Industrial compressed-air systems requiring extended oil service intervals
- Compressor systems operating under demanding industrial conditions
Key Features & Benefits
- Oil change intervals of up to 10,000 operating hours in suitable oil-injected screw compressors
- Low maintenance and operating costs
- Low tendency to evaporation and reduced oil vapour impact on compressed air
- Longer service life of oil filters, activated carbon filters and oil separators
- Low formation of oxidation residues in the oil circuit
- Good water demulsibility
- Neutral behaviour towards seals, supporting easier compressor oil conversion
- Meets/exceeds relevant DIN 51506-VDL and ISO 6743-3 requirements stated by Klüber
Technical Data
| Article Number | 050005 |
| Product Type | Synthetic air compressor oil |
| ISO Viscosity Grade | 46 |
| Appearance | Clear |
| Colour | Colourless |
| Base Oil | Synthetic hydrocarbon |
| Kinematic Viscosity at 40°C | approx. 46 mm²/s |
| Kinematic Viscosity at 100°C | approx. 7.3 mm²/s |
| Viscosity Index | ≥ 115 |
| Density at 20°C | approx. 0.85 g/cm³ |
| Flash Point | ≥ 240°C |
| Pour Point | ≤ -36°C |
| Demulsifying Capacity at 54°C | 40/37/3 ml |
| Foaming Test, ASTM D892 / ISO 6247 | 50/0 ml (Sequences I, II and III) |
| Minimum Shelf Life | Approx. 60 months in unopened original container under suitable storage conditions |
| Oil Change Interval | Up to 10,000 operating hours under suitable operating conditions |
| Standards / Requirements | DIN 51506-VDL; ISO 6743-3 L-DAJ (VG 32/46/55/68) |
Related Klüber Products
Klüberfluid C-F 3 Ultra
Open Gear Lubricant
- Adhesive operational lubricant for large girth gear drives
- Available in industrial pack sizes
Klübersynth GH 6-680
Synthetic Gear & Bearing Oil
- Synthetic lubricant for heavily loaded gears and bearings
- Contact us for further technical details
Klüber WOLFRACOAT
High-temperature Lubricating Paste
- Assembly paste for high-temperature, high-load applications
- Contact us for further technical details